nsBAS EN 15611+A1:2024
Područje primjene na željeznici – Kočenje – Relejni ventili
Opšte informacije
Status:Projekt
Broj stranica:51
Metoda usvajanja:Proglašavanje
Jezik:engleski
Izdanje:2.
Datum realizacije:22.04.2024
Predviđeni datum naredne faze:09.06.2024
Tehnički komitet:BAS/TC 46, Željeznice
Direktive:
2016/797/EU, Directive (EU) 2016/797 of the European Parliament and of the Council of 11 May 2016 on the interoperability of the rail system within the European Union (Text with EEA relevance)
ICS:
45.040, Materijali i komponente za željezničku tehniku
Apstrakt
This document is applicable to relay valves designated to control the brake cylinder pressure of compressed air brakes fitted to railway vehicles, in association with an air brake distributor valve or other control device. It covers one stage relay valves and relay valves adjusting the brake cylinder pressure in response to a change in vehicle speed or load that is either continuously variable or in two or more stages, i.e. empty – loaded.
Relay valves operating with other pressures, in particular the brake pipe pressure, are not included.
This document specifies the requirements for the design, manufacture and testing of relay valves.
Životni ciklus
...
Izvorni dokument i stepen usklađenosti
EN 15611:2020+A1:2022, identičan
Veza sa BAS standardima
Radni materijal
Samo članovi tehničkog komiteta imaju pristup radnom materijalu. Ukoliko ste član, molimo prijavite se sa vašim nalogom i dobićete pristup dokumentima. Prijavite se