prBAS EN ISO 17779:2026

Brazing - Specification and qualification of brazing procedures for metallic materials (ISO 17779:2021)


Opšte informacije
Status:Projekt
Broj stranica:10
Metoda usvajanja:Proglašavanje
Jezik:engleski
Izdanje:1.
Datum realizacije:13.10.2025
Predviđeni datum naredne faze:30.10.2025
Tehnički komitet:BAS/TC 2, Zavarivanje i srodni postupci
ICS:
25.160.01, Zavarivanje, mehko i tvrdo lemljenje općenito
25.160.50, Tvrdo i mehko lemljenje

Apstrakt
This document specifies requirements for the specification and qualification of brazing procedures for brazing of metallic materials. This document specifies requirements for brazing of the test piece, testing of the test specimen, essential variables and their range of qualification, acceptance criteria, brazing procedure qualification record (BPQR) and brazing procedure specification (BPS). This document gives general provisions on quality requirements for brazing (see Annex A). This document does not cover testing of residual stresses, corrosion resistance and impact properties. This document applies to the following brazing processes according to ISO 857-2 and ISO 4063:2009 with local and global heating: —    911 Infrared brazing; —    912 Flame brazing, torch brazing; —    913 Laser beam brazing; —    914 Electron beam brazing; —    916 Induction brazing; —    918 Resistance brazing; —    919 Diffusion brazing; —    921 Furnace brazing; —    922 Vacuum brazing; —    923 Dip-bath brazing; —    924 Salt-bath brazing; —    925 Flux bath brazing; —    926 Immersion brazing; —    972 Arc weld brazing. The principles of this document can be applied to other brazing processes and brazing of materials not listed.

Životni ciklus
...

Izvorni dokument i stepen usklađenosti
EN ISO 17779:2025, identičan

Veza sa BAS standardima

Radni materijal

Samo članovi tehničkog komiteta imaju pristup radnom materijalu. Ukoliko ste član, molimo prijavite se sa vašim nalogom i dobićete pristup dokumentima. Prijavite se