pnBAS CEN/TS 17152-3/Cor 1:2025 Plastics piping systems for non-pressure underground conveyance and storage of non-potable water - Boxes used for infiltration, attenuation and storage systems - Part 3: Assessment of conformity
30.20
BAS/TC 53
20.03.2025
16.04.2025
pnBAS CEN/TS 17152-4:2025 Plastics piping systems for non-pressure underground conveyance and storage of non-potable water - Boxes used for infiltration, attenuation and storage systems - Part 4: Guidance for structural design of modular systems
30.20
BAS/TC 53
20.03.2025
16.04.2025
pnBAS EN 12201-1:2025 Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 1: General
30.20
BAS/TC 53
20.03.2025
16.04.2025
pnBAS EN 12201-2:2025 Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 2: Pipes
30.20
BAS/TC 53
20.03.2025
16.04.2025
pnBAS EN 12201-3:2025 Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 3: Fittings
30.20
BAS/TC 53
20.03.2025
16.04.2025
pnBAS EN 12201-4:2025 Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 4: Valves for water supply systems
30.20
BAS/TC 53
20.03.2025
16.04.2025
pnBAS EN 12201-5:2025 Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 5: Fitness for purpose of the system
30.20
BAS/TC 53
20.03.2025
16.04.2025
pnBAS EN 17038-4:2025 Pumps - Methods of qualification of the Energy Efficiency Index for rotodynamic pump units - Part 4: Testing and calculation of energy efficiency index (EEI) of submersible multistage pump units
30.20
BAS/TC 53
20.03.2025
16.04.2025
pnBAS EN 17670-2:2025 Plastics piping systems for non-pressure underground conveyance of surface water - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specification for road gullies
30.20
BAS/TC 53
20.03.2025
16.04.2025
pnBAS EN ISO 16486-1:2025 Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 1: General
30.20
BAS/TC 53
20.03.2025
16.04.2025
pnBAS EN ISO 7510:2025 Plastics piping systems - Glass-reinforced plastics (GRP) components - Determination of the amounts of constituents
30.20
BAS/TC 53
20.03.2025
16.04.2025
pnBAS ISO 10928:2025 Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Methods for regression analysis and their use
30.20
BAS/TC 53
20.03.2025
16.04.2025
pnBAS ISO 13265:2025 Thermoplastics piping systems for non-pressure underground drainage and sewerage — Joints for buried non-pressure applications — Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure
30.20
BAS/TC 53
20.03.2025
16.04.2025
pnBAS ISO 16422-1:2025 Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure — Part 1: General
30.20
BAS/TC 53
20.03.2025
16.04.2025
pnBAS ISO 16422-2:2025 Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure — Part 2: Pipes
30.20
BAS/TC 53
20.03.2025
16.04.2025
pnBAS ISO 16422-5:2025 Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure — Part 5: Fitness for purpose of the system
30.20
BAS/TC 53
20.03.2025
16.04.2025
pnBAS ISO 21018-1:2025 Hydraulic fluid power — Monitoring the level of particulate contamination of the fluid — Part 1: General principles
30.20
BAS/TC 53
20.03.2025
16.04.2025
pnBAS ISO 4437-1:2025 Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 1: General
30.20
BAS/TC 53
20.03.2025
16.04.2025
pnBAS ISO 4437-2:2025 Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 2: Pipes
30.20
BAS/TC 53
20.03.2025
16.04.2025
pnBAS ISO 4437-3:2025 Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 3: Fittings
