nsBAS EN 13523-14:2024

Coil coated metals - Test methods - Part 14: Chalking (Helmen method)


General information
Status:Project
Number of pages:8
Adoption method:Proglašavanje
Language:engleski
Edition:3.
Realization date:17.04.2024
Forseen date for next stage code:17.06.2024
Technical committee:BAS/TC 39, Corrosion protection of materials
ICS:
25.220.60, Organic coatings

Abstract
This document describes the procedure for determining objectively the chalking resulting from natural or artificial weathering of an organic coating on a metallic substrate. The advantage of this procedure for measuring chalking of an organic coating is that the result can be read off immediately on an instrument. Subjective judgement by visual comparison of test specimens with reference specimens is not necessary. Reproducible results can only be obtained by careful execution of the test. Special attention is paid to the adhesive tape and its application to the test surface. The test method is not applicable to embossed coatings. In the case of textured coatings, the degree of texture will influence readings. Also, dirt collection can influence readings on outdoor weathered specimens. NOTE Different methods for assessing chalking are in use. The results of these different methods are not comparable.

Lifecycle
...

Original document and degree of correspondence
EN 13523-14:2023, identical

Relation to BAS standards

Work material

Only members of the technical committee have access to work material. If you are a members of this technical committee you need to login to view the documents. Login