nsBAS EN 13523-14:2024

Coil coated metals - Test methods - Part 14: Chalking (Helmen method)


Opće informacije
Status:Projekt
Broj stranica:8
Metoda usvajanja:Proglašavanje
Jezik:engleski
Izdanje:3.
Nadnevak realizacije:17.04.2024
Predviđeni nadnevak naredne faze:17.06.2024
Tehnički komitet:BAS/TC 39, Zaštita materijala od korozije
ICS:
25.220.60, Organske prevlake

Apstrakt
This document describes the procedure for determining objectively the chalking resulting from natural or artificial weathering of an organic coating on a metallic substrate. The advantage of this procedure for measuring chalking of an organic coating is that the result can be read off immediately on an instrument. Subjective judgement by visual comparison of test specimens with reference specimens is not necessary. Reproducible results can only be obtained by careful execution of the test. Special attention is paid to the adhesive tape and its application to the test surface. The test method is not applicable to embossed coatings. In the case of textured coatings, the degree of texture will influence readings. Also, dirt collection can influence readings on outdoor weathered specimens. NOTE Different methods for assessing chalking are in use. The results of these different methods are not comparable.

Životni ciklus
...

Izvorni dokument i stepen usklađenosti
EN 13523-14:2023, identičan

Veza sa BAS standardima

Radni materijal

Samo članovi tehničkog komiteta imaju pristup radnom materijalu. Ukoliko ste član, molimo prijavite se sa vašim nalogom i dobićete pristup dokumentima. Пријавите се