BAS EN ISO 21009-2:2017
Cryogenic vessels - Static vacuum insulated vessels - Part 2: Operational requirements
General Information
Status: Published
No. of pages: 19
Language: English
Edition: 1.
Adoption method: Endorsment
Publication date: 08.06.2017
Technical committee:
Directive:
2014/68/EU, Directive 2014/68/EU of the European Parliament and of the Council of 15 May 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of pressure equipment
...
Abstract
ISO 21009-2:2015 specifies operational requirements for static vacuum insulated vessels designed for a maximum allowable pressure of more than 50 kPa (0,5 bar). It may also be used as a guideline for vessels designed for a maximum allowable pressure of less than 50 kPa (0,5 bar).
ISO 21009-2:2015 applies to vessels designed for cryogenic fluids specified in ISO 21009‑1.
Static cryogenic vessels are often partly equipped by the manufacturer, but may be installed or re-installed by another party, such as the operator, user or owner.
NOTE 1 For the installation of these vessels, additional requirements can apply; these are defined in specific regulations.
NOTE 2 Some requirements of this standard can be covered by local regulations, e.g. safety distances, occupational safety and health. Where there is a conflict between the requirements of this International Standard and any applicable local regulation, the local regulation always takes precedence.
Lifecycle
...
Original document and degree of correspondence
- EN ISO 21009-2:2015, identical
- ISO 21009-2:2015, identical