prBAS EN 13480-6:2025
Metallic industrial piping - Part 6: Additional requirements for buried piping
General information
Status:Project
Number of pages:36
Adoption method:Proglašavanje
Language:engleski
Edition:5.
Realization date:23.10.2024
Forseen date for next stage code:18.03.2025
Technical committee:BAS/TC 16, Mechanical elements
Directives:
2014/68/EU, Directive 2014/68/EU of the European Parliament and of the Council of 15 May 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of pressure equipment
ICS:
23.040.01, Pipeline components and pipelines in general
Abstract
This document specifies requirements for industrial piping either totally buried or partly buried and partly run in sleeves or similar protection. It is used in conjunction with the other six parts of
EN 13480:2024 series.
Where buried piping subject to this standard connects to piping installed under other jurisdiction such as pipelines, the transition can be made at a closing element e.g. an isolating or regulating valve separating the two sections. This can be close to the boundary of the industrial site, but can be inside or outside the boundary.
Operating temperature up to 75 °C.
NOTE For higher temperatures reference can be made to EN 13941-1:2019+A1:2021 and EN 13941 1:2019+A1:2021, but it is kept in mind, that CEN/TC 107 only deals with pre-insulated piping with temperatures up to 140 °C and diameters up to 800 mm, which is state of the art for these products.
Lifecycle
...
Original document and degree of correspondence
EN 13480-6:2024, identical
Relation to BAS standards
Work material
Only members of the technical committee have access to work material. If you are a members of this technical committee you need to login to view the documents. Login