BAS EN 13480-6/A1:2020

Metallic industrial piping - Part 6: Additional requirements for buried piping


General Information
Status: Published
No. of pages: 5
Language: English
Edition: 1.
Adoption method: Endorsment
Publication date: 29.06.2020
Technical committee:
Directive:
2014/68/EU, Directive 2014/68/EU of the European Parliament and of the Council of 15 May 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of pressure equipment
...

Abstract
This European Standard specifies requirements for industrial piping either totally buried or partly buried and partly run in sleeves or similar protection. It is used in conjunction with the other six parts of EN 13480. Where buried piping subject to this standard connects to piping installed under other jurisdiction such as pipelines, the transition should be made at a closing element e.g. an isolating or regulating valve separating the two sections. This should be close to the boundary of the industrial site, but may be inside or outside the boundary. Operating temperature up to 75 °C. NOTE For higher temperatures reference should be made to EN 13941, but it should be kept in mind, that CEN/TC 107 only deals with pre-insulated piping with temperatures up to 140 °C and diameters up to 800 mm, which is state of the art for these products.

Lifecycle
...

Original document and degree of correspondence
  • EN 13480-6:2017/A1:2019, identical