nsBAS EN 12697-47:2025 Bituminous mixtures - Test methods - Part 47: Determination of the ash content of natural asphalts
40.20
BAS/TC 22
28.11.2025
28.01.2026
nsBAS EN 12846-1:2025 Bitumen and bituminous binders - Determination of efflux time by the efflux viscometer - Part 1: Bituminous emulsions
40.20
BAS/TC 22
28.11.2025
28.01.2026
nsBAS EN 12846-2:2025 Bitumen and bituminous binders - Determination of efflux time by the efflux viscometer - Part 2: Cut-back and fluxed bituminous binders
nsBAS EN 13877-2:2025 Concrete pavements - Part 2: Functional requirements for concrete pavements
40.20
BAS/TC 22
28.11.2025
28.01.2026
nsBAS EN 14389:2025 Road traffic noise reducing devices - Procedures for assessing long term performance
40.20
BAS/TC 22
28.11.2025
28.01.2026
nsBAS EN 14769:2025 Bitumen and bituminous binders - Accelerated long-term ageing conditioning by a Pressure Ageing Vessel (PAV)
40.20
BAS/TC 22
28.11.2025
28.01.2026
nsBAS EN 14770:2025 Bitumen and bituminous binders - Determination of complex shear modulus and phase angle - Dynamic Shear Rheometer (DSR)
40.20
BAS/TC 22
28.11.2025
28.01.2026
nsBAS EN 14771:2025 Bitumen and bituminous binders - Determination of the flexural creep stiffness - Bending Beam Rheometer (BBR)
40.20
BAS/TC 22
28.11.2025
28.01.2026
nsBAS EN 15330-4:2025 Surfaces for sports areas - Synthetic turf and needle-punched surfaces primarily designed for outdoor use - Part 4: Specification for shockpads used with synthetic turf, needle-punch and textile sports surfaces
40.20
BAS/TC 22
28.11.2025
28.01.2026
nsBAS EN 16416:2025 Geosynthetic clay barriers - Determination of water flux index - Flexible wall permeameter method at constant head
40.20
BAS/TC 22
28.11.2025
28.01.2026
nsBAS EN 17685-1:2025 Earthworks - Chemical tests - Part 1: Determination of loss on ignition
40.20
BAS/TC 22
28.11.2025
28.01.2026
nsBAS EN 17738:2025 Geotextiles and geotextile-related products - Damage during installation procedure - Full scale test
40.20
BAS/TC 22
28.11.2025
28.01.2026
nsBAS EN 50483-3:2025 Test requirements for low voltage aerial bundled cable accessories - Part 3: Tension and suspension clamps for neutral messenger system
