BAS standards at public enquiry
Institute for Standardization of Bosnia and Herzegovina, on the proposal of BAS technical committees, announces a public enquiry on draft national standards (stage code 40.20).
Deadline for submission of comments on draft national standards is 60 days from the publication of the enquiry on the Institute's website (if necessary, it can be shortened to no less than 30 days).
The drafts of BAS standards are available to our stakeholders via online module for reading the draft of BAS standards, and basic information about the draft (title, scope, technical committee that prepared the draft for public discussion, etc.) is available on the ISBIH website.
The request for access to the draft BAS standard at the public enquiry should be sent to email: stand@isbih.gov.ba. To be able to access the online module for reading the draft BAS standards, you must be registered on our website.
Written comments on the draft national standards (with the designation of BAS technical committee and the reference designation of the BAS draft standards) shall be submitted to the Institute.
To fill this form correctly, see the Comment Form Use Guide.
Standard reference | Stage code | BAS/TC | Real date | Forseen date for next stage code |
---|---|---|---|---|
nsBAS ISO 12164-5:2025 Hollow taper interface with flange contact surface - Part 5: Shanks of types AS, CS and ES | 40.20 | BAS/TC 40 | 23.04.2025 | 22.06.2025 |
nsBAS ISO 12164-6:2025 Hollow taper interface with flange contact surface — Part 6: Receivers of types AS, CS and ES for hollow taper shanks of types AS, CS and ES | 40.20 | BAS/TC 40 | 23.04.2025 | 22.06.2025 |
nsBAS ISO 13091-1:2001/A2:2025 Mechanical vibration - Vibrotactile perception thresholds for the assessment of nerve dysfunction - Part 1: Methods of measurement at the fingertips - Amendment 2 | 40.20 | BAS/TC 40 | 23.04.2025 | 22.06.2025 |
nsBAS ISO 13100:2025 Methods for zeta potential determination — Streaming potential and streaming current methods for porous materials | 40.20 | BAS/TC 9 | 24.04.2025 | 23.06.2025 |
nsBAS ISO 13265:2025 Thermoplastics piping systems for non-pressure underground drainage and sewerage — Joints for buried non-pressure applications — Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure | 40.20 | BAS/TC 53 | 09.06.2025 | 08.08.2025 |
nsBAS ISO 13315-1:2025 Environmental management for concrete and concrete structures — Part 1: General principles | 40.20 | BAS/TC 21 | 14.04.2025 | 13.06.2025 |
nsBAS ISO 13315-3:2025 Environmental management for concrete and concrete structures — Part 3: Production of concrete constituents and concrete | 40.20 | BAS/TC 21 | 14.04.2025 | 13.06.2025 |
nsBAS ISO 13317-1:2025 Determination of particle size distribution by gravitational liquid sedimentation methods — Part 1: General principles, requirements and guidance | 40.20 | BAS/TC 9 | 24.04.2025 | 23.06.2025 |
nsBAS ISO 13318-1:2025 Determination of particle size distribution by centrifugal liquid sedimentation methods — Part 1: General principles, requirements and guidance | 40.20 | BAS/TC 9 | 24.04.2025 | 23.06.2025 |
nsBAS ISO 14119:2025 Safety of machinery - Interlocking devices associated with guards - Principles for design and selection | 40.20 | BAS/TC 40 | 23.04.2025 | 22.06.2025 |
nsBAS ISO 14180:2025 Coal - Guidance on the sampling of coal seams | 40.20 | BAS/TC 27 | 14.04.2025 | 13.06.2025 |
nsBAS ISO 14289-2:2025 Document management applications — Electronic document file format enhancement for accessibility — Part 2: Use of ISO 32000-2 (PDF/UA-2) | 40.20 | BAS/TC 44 | 04.06.2025 | 03.08.2025 |
nsBAS ISO 14306-1:2025 Industrial automation systems and integration — JT file format specification for 3D visualization — Part 1: Overview and fundamental principles | 40.20 | BAS/TC 51 | 24.04.2025 | 23.06.2025 |
nsBAS ISO 14306-2:2025 Industrial automation systems and integration — JT file format specification for 3D visualization — Part 2: Vocabulary | 40.20 | BAS/TC 51 | 24.04.2025 | 23.06.2025 |
nsBAS ISO 14635-1:2025 Gears — FZG test procedures — Part 1: FZG test method A/8,3/90 for relative scuffing load-carrying capacity of oils | 40.20 | BAS/TC 16 | 10.04.2025 | 09.06.2025 |
nsBAS ISO 14635-2:2025 Gears — FZG test procedures — Part 2: FZG step load test A10/16, 6R/120 for relative scuffing load-carrying capacity of high EP oils | 40.20 | BAS/TC 16 | 10.04.2025 | 09.06.2025 |
nsBAS ISO 14635-3:2025 Gears — FZG test procedures — Part 3: FZG test method A/2,8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases | 40.20 | BAS/TC 16 | 10.04.2025 | 09.06.2025 |
nsBAS ISO 15926-6:2025 Industrial automation systems and integration — Integration of life-cycle data for process plants including oil and gas production facilities — Part 6: Rules for the development and validation of reference data of ISO/TS 15926-4 | 40.20 | BAS/TC 51 | 24.04.2025 | 23.06.2025 |
nsBAS ISO 16000-33:2025 Indoor air — Part 33: Determination of phthalates with gas chromatography/mass spectrometry (GC/MS) | 40.20 | BAS/TC 7 | 15.05.2025 | 15.07.2025 |
nsBAS ISO 16053:2025 Paints and varnishes — Coating materials and coating systems for exterior wood — Natural weathering test | 40.20 | BAS/TC 39 | 11.04.2025 | 11.06.2025 |