BAS standards at public enquiry
Institute for Standardization of Bosnia and Herzegovina, on the proposal of BAS technical committees, announces a public enquiry on draft national standards (stage code 40.20).
Deadline for submission of comments on draft national standards is 60 days from the publication of the enquiry on the Institute's website (if necessary, it can be shortened to no less than 30 days).
The drafts of BAS standards are available to our stakeholders via online module for reading the draft of BAS standards, and basic information about the draft (title, scope, technical committee that prepared the draft for public discussion, etc.) is available on the ISBIH website.
The request for access to the draft BAS standard at the public enquiry should be sent to email: stand@isbih.gov.ba. To be able to access the online module for reading the draft BAS standards, you must be registered on our website.
Written comments on the draft national standards (with the designation of BAS technical committee and the reference designation of the BAS draft standards) shall be submitted to the Institute.
To fill this form correctly, see the Comment Form Use Guide.
Standard reference | Stage code | BAS/TC | Real date | Forseen date for next stage code |
---|---|---|---|---|
nsBAS EN ISO 4259-5:2025 Petroleum and related products - Precision of measurement methods and results - Part 5: Statistical assessment of agreement between two different measurement methods that claim to measure the same property | 40.20 | BAS/TC 11 | 14.04.2025 | 13.06.2025 |
nsBAS EN ISO 4349:2025 Solid recovered fuels - Determination of the Recycling Index for co-processing | 40.20 | BAS/TC 27 | 14.04.2025 | 13.06.2025 |
nsBAS EN ISO 4545-1:2025 Metallic materials - Knoop hardness test - Part 1: Test method | 40.20 | BAS/TC 4 | 30.05.2025 | 30.06.2025 |
nsBAS EN ISO 4628-10:2025 Paints and varnishes - Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 10: Assessment of degree of filiform corrosion | 40.20 | BAS/TC 39 | 11.04.2025 | 11.06.2025 |
nsBAS EN ISO 4628-6:2025 Paints and varnishes - Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 6: Assessment of degree of chalking by tape method | 40.20 | BAS/TC 39 | 11.04.2025 | 11.06.2025 |
nsBAS EN ISO 4766:2025 Fasteners - Slotted set screws with flat point | 40.20 | BAS/TC 16 | 10.04.2025 | 09.06.2025 |
nsBAS EN ISO 5114-1:2025 Acoustics - Determination of uncertainties associated with sound emission measures - Part 1: Sound power levels determined from sound pressure measurements | 40.20 | BAS/TC 36 | 24.04.2025 | 23.06.2025 |
nsBAS EN ISO 5124:2025 Loading and unloading of liquefied natural gas (LNG) tank wagons and containers | 40.20 | BAS/TC 31 | 15.04.2025 | 14.06.2025 |
nsBAS EN ISO 5362:2025 Anaesthetic and respiratory equipment - Anaesthetic reservoir bags | 40.20 | BAS/TC 25 | 10.04.2025 | 09.06.2025 |
nsBAS EN ISO 544:2025 Welding consumables - Technical delivery conditions for filler materials and fluxes - Type of product, dimensions, tolerances and markings | 40.20 | BAS/TC 2 | 24.04.2025 | 23.06.2025 |
nsBAS EN ISO 56008:2025 Innovation management - Tools and methods for innovation operation measurements - Guidance | 40.20 | BAS/TC 3 | 28.04.2025 | 27.06.2025 |
nsBAS EN ISO 5667-3:2025 Water quality - Sampling - Part 3: Preservation and handling of water samples | 40.20 | BAS/TC 7 | 15.05.2025 | 15.07.2025 |
nsBAS EN ISO 5754:2025 Sintered metal materials, excluding hardmetals - Unnotched impact test piece | 40.20 | BAS/TC 4 | 30.05.2025 | 30.06.2025 |
nsBAS EN ISO 6306:2025 Chemical analysis of steel - Order of listing elements in steel standards | 40.20 | BAS/TC 4 | 30.05.2025 | 30.06.2025 |
nsBAS EN ISO 636:2025 Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels - Classification | 40.20 | BAS/TC 2 | 24.04.2025 | 23.06.2025 |
nsBAS EN ISO 642:2025 Steel - Hardenability test by end quenching (Jominy test) | 40.20 | BAS/TC 4 | 30.05.2025 | 30.06.2025 |
nsBAS EN ISO 643:2025 Steels - Micrographic determination of the apparent grain size | 40.20 | BAS/TC 4 | 30.05.2025 | 30.06.2025 |
nsBAS EN ISO 6507-1:2025 Metallic materials - Vickers hardness test - Part 1: Test method | 40.20 | BAS/TC 4 | 30.05.2025 | 30.06.2025 |
nsBAS EN ISO 6508-1:2025 Metallic materials - Rockwell hardness test - Part 1: Test method | 40.20 | BAS/TC 4 | 30.05.2025 | 30.06.2025 |
nsBAS EN ISO 6508-2:2025 Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines and indenters | 40.20 | BAS/TC 4 | 30.05.2025 | 30.06.2025 |