BAS standards at public enquiry
Institute for Standardization of Bosnia and Herzegovina, on the proposal of BAS technical committees, announces a public enquiry on draft national standards (stage code 40.20).
Deadline for submission of comments on draft national standards is 60 days from the publication of the enquiry on the Institute's website (if necessary, it can be shortened to no less than 30 days).
The drafts of BAS standards are available to our stakeholders via online module for reading the draft of BAS standards, and basic information about the draft (title, scope, technical committee that prepared the draft for public discussion, etc.) is available on the ISBIH website.
The request for access to the draft BAS standard at the public enquiry should be sent to email: stand@isbih.gov.ba. To be able to access the online module for reading the draft BAS standards, you must be registered on our website.
Written comments on the draft national standards (with the designation of BAS technical committee and the reference designation of the BAS draft standards) shall be submitted to the Institute.
To fill this form correctly, see the Comment Form Use Guide.
Standard reference | Stage code | BAS/TC | Real date | Forseen date for next stage code |
---|---|---|---|---|
nsBAS EN ISO 26443:2025 Fine ceramics (advanced ceramics, advanced technical ceramics) - Rockwell indentation test for evaluation of adhesion of ceramic coatings | 40.20 | BAS/TC 37 | 30.04.2025 | 29.06.2025 |
nsBAS EN ISO 2740:2025 Sintered metal materials, excluding hardmetals - Tensile test pieces | 40.20 | BAS/TC 4 | 30.05.2025 | 30.06.2025 |
nsBAS EN ISO 2811-3:2025 Paints and varnishes - Determination of density - Part 3: Oscillation method | 40.20 | BAS/TC 39 | 11.04.2025 | 11.06.2025 |
nsBAS EN ISO 2884-1:2025 Paints and varnishes - Determination of viscosity using rotational viscometers - Part 1: Absolute viscosity measurement with cone-plate measuring geometry at high shear rates | 40.20 | BAS/TC 39 | 11.04.2025 | 11.06.2025 |
nsBAS EN ISO 2884-2:2025 Paints and varnishes - Determination of viscosity using rotational viscometers - Part 2: Relative measurement of viscosity using disc or ball spindles at specified speeds | 40.20 | BAS/TC 39 | 11.04.2025 | 11.06.2025 |
nsBAS EN ISO 29461-3:2025 Air intake filter systems for rotary machinery - Test methods - Part 3: Mechanical integrity of filter elements | 40.20 | BAS/TC 7 | 15.05.2025 | 15.07.2025 |
nsBAS EN ISO 29464:2025 Cleaning of air and other gases - Vocabulary | 40.20 | BAS/TC 7 | 15.05.2025 | 15.07.2025 |
nsBAS EN ISO 3104:2025 Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity | 40.20 | BAS/TC 11 | 14.04.2025 | 13.06.2025 |
nsBAS EN ISO 3262-10:2025 Extenders - Specifications and methods of test - Part 10: Natural talc/chlorite in lamellar form | 40.20 | BAS/TC 39 | 11.04.2025 | 11.06.2025 |
nsBAS EN ISO 3262-11:2025 Extenders - Specifications and methods of test - Part 11: Natural talc, in lamellar form, containing carbonates | 40.20 | BAS/TC 39 | 11.04.2025 | 11.06.2025 |
nsBAS EN ISO 3262-17:2025 Extenders - Specifications and methods of test - Part 17: Precipitated calcium silicate | 40.20 | BAS/TC 39 | 11.04.2025 | 11.06.2025 |
nsBAS EN ISO 3506-5:2025 Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 5: Special fasteners (also including fasteners from nickel alloys) for high temperature applications | 40.20 | BAS/TC 16 | 10.04.2025 | 09.06.2025 |
nsBAS EN ISO 3549:2025 Zinc dust pigments for paints - Specifications and test methods | 40.20 | BAS/TC 39 | 11.04.2025 | 11.06.2025 |
nsBAS EN ISO 3581:2025 Welding consumables - Covered electrodes for manual metal arc welding of stainless and heat-resisting steels - Classification | 40.20 | BAS/TC 2 | 24.04.2025 | 23.06.2025 |
nsBAS EN ISO 3677:2025 Filler metal for brazing - Designation | 40.20 | BAS/TC 2 | 24.04.2025 | 23.06.2025 |
nsBAS EN ISO 3758:2025 Textiles - Care labelling code using symbols | 40.20 | BAS/TC 48 | 13.05.2025 | 14.07.2025 |
nsBAS EN ISO 3834-6:2025 Quality requirements for fusion welding of metallic materials - Part 6: Guidelines on implementing ISO 3834 series | 40.20 | BAS/TC 2 | 24.04.2025 | 23.06.2025 |
nsBAS EN ISO 3838/A1:2025 Crude petroleum and liquid or solid petroleum products - Determination of density or relative density - Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods - Amendment 1 | 40.20 | BAS/TC 11 | 14.04.2025 | 13.06.2025 |
nsBAS EN ISO 3882:2025 Metallic and other inorganic coatings - Review of methods of measurement of thickness | 40.20 | BAS/TC 39 | 11.04.2025 | 11.06.2025 |
nsBAS EN ISO 3887:2025 Steels - Determination of the depth of decarburization | 40.20 | BAS/TC 4 | 30.05.2025 | 30.06.2025 |