BAS standards at public enquiry
Institute for Standardization of Bosnia and Herzegovina, on the proposal of BAS technical committees, announces a public enquiry on draft national standards (stage code 40.20).
Deadline for submission of comments on draft national standards is 60 days from the publication of the enquiry on the Institute's website (if necessary, it can be shortened to no less than 30 days).
The drafts of BAS standards are available to our stakeholders via online module for reading the draft of BAS standards, and basic information about the draft (title, scope, technical committee that prepared the draft for public discussion, etc.) is available on the ISBIH website.
The request for access to the draft BAS standard at the public enquiry should be sent to email: stand@isbih.gov.ba. To be able to access the online module for reading the draft BAS standards, you must be registered on our website.
Written comments on the draft national standards (with the designation of BAS technical committee and the reference designation of the BAS draft standards) shall be submitted to the Institute.
To fill this form correctly, see the Comment Form Use Guide.
Standard reference | Stage code | BAS/TC | Real date | Forseen date for next stage code |
---|---|---|---|---|
nsBAS EN ISO 18279:2025 Brazing - Imperfections in brazed joints | 40.20 | BAS/TC 2 | 24.04.2025 | 23.06.2025 |
nsBAS EN ISO 18314-4:2025 Analytical colorimetry - Part 4: Metamerism index for pairs of samples for change of illuminant | 40.20 | BAS/TC 39 | 11.04.2025 | 11.06.2025 |
nsBAS EN ISO 1833-4:2025 Textiles - Quantitative chemical analysis - Part 4: Mixtures of certain protein fibres with certain other fibres (method using hypochlorite) | 40.20 | BAS/TC 48 | 13.05.2025 | 14.07.2025 |
nsBAS EN ISO 18335:2025 Petroleum products and related products - Determination of kinematic viscosity by calculation from the measured dynamic viscosity and density - Method by constant pressure viscometer | 40.20 | BAS/TC 11 | 14.04.2025 | 13.06.2025 |
nsBAS EN ISO 18393-1:2025 Thermal insulation products - Determination of settlement - Part 1: Loose-fill insulation for ventilated attics simulating humidity and temperature cycling | 40.20 | BAS/TC 36 | 24.04.2025 | 23.06.2025 |
nsBAS EN ISO 18563-2:2025 Non-destructive testing - Characterization and verification of ultrasonic phased array equipment - Part 2: Array probes | 40.20 | BAS/TC 24 | 22.04.2025 | 21.06.2025 |
nsBAS EN ISO 18563-3:2025 Non-destructive testing - Characterization and verification of ultrasonic phased array equipment - Part 3: Complete systems | 40.20 | BAS/TC 24 | 22.04.2025 | 21.06.2025 |
nsBAS EN ISO 18847:2025 Solid biofuels - Determination of particle density of pellets and briquettes | 40.20 | BAS/TC 27 | 14.04.2025 | 13.06.2025 |
nsBAS EN ISO 19403-2:2025 Paints and varnishes - Wettability - Part 2: Determination of the surface free energy of solid surfaces by measuring the contact angle | 40.20 | BAS/TC 39 | 11.04.2025 | 11.06.2025 |
nsBAS EN ISO 19403-3:2025 Paints and varnishes - Wettability - Part 3: Determination of the surface tension of liquids using the pendant drop method | 40.20 | BAS/TC 39 | 11.04.2025 | 11.06.2025 |
nsBAS EN ISO 19675:2025 Non-destructive testing - Ultrasonic testing - Specification for a calibration block for phased array testing (PAUT) | 40.20 | BAS/TC 24 | 22.04.2025 | 21.06.2025 |
nsBAS EN ISO 19901-3:2025 Oil and gas industries including lower carbon energy - Specific requirements for offshore structures - Part 3: Topsides structure | 40.20 | BAS/TC 11 | 14.04.2025 | 13.06.2025 |
nsBAS EN ISO 19901-8:2025 Oil and gas industries including lower carbon energy - Offshore structures - Part 8: Marine soil investigations | 40.20 | BAS/TC 11 | 14.04.2025 | 13.06.2025 |
nsBAS EN ISO 19905-1:2025 Oil and gas industries including lower carbon energy - Site-specific assessment of mobile offshore units - Part 1: Jack-ups: elevated at a site | 40.20 | BAS/TC 11 | 14.04.2025 | 13.06.2025 |
nsBAS EN ISO 20137:2025 Leather - Chemical tests - Guidelines for testing critical chemicals in leather | 40.20 | BAS/TC 48 | 13.05.2025 | 14.07.2025 |
nsBAS EN ISO 20182:2025 Refractory test-piece preparation - Gunning refractory panels by the pneumatic-nozzle mixing type guns | 40.20 | BAS/TC 37 | 30.04.2025 | 29.06.2025 |
nsBAS EN ISO 20344/A1:2025 Personal protective equipment - Test methods for footwear - Amendment 1 | 40.20 | BAS/TC 14 | 15.04.2025 | 15.06.2025 |
nsBAS EN ISO 20345/A1:2025 Personal protective equipment - Safety footwear - Amendment 1 | 40.20 | BAS/TC 14 | 15.04.2025 | 15.06.2025 |
nsBAS EN ISO 20346/A1:2025 Personal protective equipment - Protective footwear - Amendment 1 | 40.20 | BAS/TC 14 | 15.04.2025 | 15.06.2025 |
nsBAS EN ISO 20347/A1:2025 Personal protective equipment - Occupational footwear - Amendment 1 | 40.20 | BAS/TC 14 | 15.04.2025 | 15.06.2025 |