prBAS EN IEC 62477-1:2025

IEC 62477-1:2022 applies to <em>power electronic converter</em> <em>systems</em> (<em>PECS</em>), any specified <em>accessories</em>, and their <em>component</em>s for <em>electronic power conversion</em> and electronic power switching, including the means for their control, protection, monitoring and measurement, such as with the main purpose of converting electric power, with rated system<em> voltage</em>s not exceeding 1 000 V AC or 1 500 V DC. This document also applies to <em>PECS</em> which intentionally emit or receive radio waves for the purpose of radio communication. This document can also be used as a reference standard for product committees producing product standards for: - adjustable speed electric power drive systems (PDS); - standalone uninterruptible power systems (UPS); - low voltage - stabilized DC power supplies; - bidirectional power converters. For <em>PECS </em>and their specified <em>accessories</em> for which no product standard exists, this document provides minimum requirements for safety aspects. This document has the status of a group safety publication in accordance with IEC Guide 104 for <em>power electronic converter</em> <em>systems</em> for solar, wind, tidal, wave, fuel cell or similar energy sources. According to IEC Guide 104, one of the responsibilities of technical committees is, wherever applicable, to make use of basic safety publications and/or group safety publications in the preparation of their product standards. Guidance for use of this group safety publication for product committees is given in Annex S. This document - establishes a common terminology for safety aspects relating to <em>PECS</em>, - establishes minimum requirements for the coordination of safety aspects of interrelated parts within a <em>PECS</em>, - establishes a common basis for minimum safety requirements for the <em>PECS</em> portion of products that contain <em>PECS</em>, - specifies requirements to reduce risks of fire, electric shock, thermal, energy and mechanical hazards, during use and operation and, where specifically stated, during service and maintenance, and - specifies minimum requirements to reduce risks with respect to <em>PECS</em> designed as pluggable and <em>permanently connected equipment</em>, whether it consists of a system of interconnected units or independent units, subject to installing, operating and maintaining the <em>PECS</em> in the manner prescribed by the manufacturer. This document does not cover - telecommunications apparatus other than power supplies to such apparatus, - functional safety aspects as covered by, for example, IEC 61508 (all parts), and - electrical equipment and systems for railways applications and electr