prBAS EN ISO 6806:2025
Rubber hoses and hose assemblies for use in oil burners - Specification
General information
Status:Project
Number of pages:17
Adoption method:Proglašavanje
Language:engleski
Edition:4.
Realization date:07.11.2024
Forseen date for next stage code:19.03.2025
Technical committee:BAS/TC 50, Packaging, plastics and rubber
ICS:
83.140.40, Hoses
27.060.10, Liquid and solid fuel burners
27.060.10, Liquid and solid fuel burners
Abstract
This document specifies the minimum requirements for rubber hoses and hose assemblies for use in oil burners.
The following two types of hose assembly are specified:
— Type 1: Hose assemblies for flux and reflux, but not for insertion between the oil burner pump and the atomizing connection; maximum working pressure 1,0 MPa (10 bar); maximum oil temperature 100 °C;
— Type 2: Hose assemblies for insertion between the oil burner pump and the atomizing connection; maximum working pressure 4,0 MPa (40 bar); maximum oil temperature 100 °C.
The hose assemblies specified in this document are not intended to be used, without special assessment, for purposes other than oil burner installations.
Lifecycle
...
Original document and degree of correspondence
EN ISO 6806:2024, identical
ISO 6806:2024, identical
Relation to BAS standards
Work material
Only members of the technical committee have access to work material. If you are a members of this technical committee you need to login to view the documents. Login