prBAS CEN/TS 15427-1-3:2025
Railway applications - Wheel/rail friction management - Part 1-3: Equipment and application - Adhesion materials
General information
Status:Project
Number of pages:20
Adoption method:Proglašavanje
Language:engleski
Edition:2.
Realization date:08.10.2024
Forseen date for next stage code:02.12.2024
Technical committee:BAS/TC 46, Railways
Directives:
2016/797/EU, Directive (EU) 2016/797 of the European Parliament and of the Council of 11 May 2016 on the interoperability of the rail system within the European Union (Text with EEA relevance)
ICS:
45.040, Materials and components for railway engineering
Abstract
This document is limited to specifying the requirements when applying adhesion material to the interface between the wheel tread and the crown of the rail and includes both trainborne and trackside solutions.
This document only covers the equipment and application of adhesion material to the active interface.
This document defines:
- the characteristics that systems for the application of adhesion materials of the wheel-rail interface shall achieve, together with applicable inspection and test methods to be carried out for verification;
- all relevant terminology which is specific to the adhesion materials of the wheel-rail interface.
This document applies to the mainline railway.
NOTE 1 This document can also be used for other railways, e.g. urban rail.
NOTE 2 Where technologies are used to influence the wheel/rail interface, other than the application of an adhesion material, this document is out of scope but can be used as guidance.
Lifecycle
...
Original document and degree of correspondence
CEN/TS 15427-1-3:2023, identical
Relation to BAS standards
Work material
Only members of the technical committee have access to work material. If you are a members of this technical committee you need to login to view the documents. Login