prBAS EN 10251:2025
Magnetic materials - Methods of determination of the geometrical characteristics of electrical steel sheet and strip
General information
Status:Project
Number of pages:15
Adoption method:Proglašavanje
Language:engleski
Edition:4.
Realization date:04.11.2024
Forseen date for next stage code:03.03.2025
Technical committee:BAS/TC 4, Steel, steel products, non-ferrous metals and alloys
ICS:
29.030, Magnetic materials
77.140.50, Flat steel products and semi-products
77.140.50, Flat steel products and semi-products
Abstract
This European Standard is intended to define the test methods used for the determination of the following geometrical characteristics of electrical steel sheet and strip:
— edge wave (wave factor);
— residual curvature;
— edge camber;
— deviation from the shearing line due to internal stresses;
— burr height of cut edges.
This European Standard applies to electrical steel sheet and strip intended for the construction of magnetic circuits and corresponding to Clauses B2, C21 and C22 of IEC 60404-1:2000.
Lifecycle
...
Original document and degree of correspondence
EN 10251:2024, identical
Relation to BAS standards
Work material
Only members of the technical committee have access to work material. If you are a members of this technical committee you need to login to view the documents. Login