prBAS EN 10051:2025
Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels - Tolerances on dimensions and shape
General information
Status:Project
Number of pages:20
Adoption method:Proglašavanje
Language:engleski
Edition:3.
Realization date:04.11.2024
Forseen date for next stage code:03.03.2025
Technical committee:BAS/TC 4, Steel, steel products, non-ferrous metals and alloys
ICS:
77.140.50, Flat steel products and semi-products
Abstract
This document specifies tolerances on dimensions and shape for continuously hot-rolled uncoated plate/sheet and strip with a maximum width of 2 200 mm and a maximum thickness of 25 mm of non-alloy and alloy steels in accordance with Table 1 (see also Annex B). This document also applies to hot-rolled strip for cold rolling.
Table 1 - Field of application
[...table not represented...]
NOTE 1 This document does not apply to:
- hot-rolled strip rolled in widths w < 600 mm (see EN 10048);
- hot-rolled patterned steel strip and plate/sheet cut from wide strip (EN 10363);
- uncoated or electrolytically coated cold rolled sheet and strip (see EN 10131);
- hot-dip coated steel sheet and strip (EN 10143);
- stainless steels.
NOTE 2 This document can also be used for steels from other standards, e. g. steels for shipbuilding.
Lifecycle
...
Original document and degree of correspondence
EN 10051:2024, identical
Relation to BAS standards
Work material
Only members of the technical committee have access to work material. If you are a members of this technical committee you need to login to view the documents. Login