BAS EN 13481-2:2024
Railway applications - Track - Performance requirements for fastening systems - Part 2: Fastening systems for concrete sleepers in ballast
General Information
Status: Published
No. of pages: 19
Language: English
Edition: 2.
Adoption method: Endorsment
Publication date: 10.07.2024
Technical committee:
Directive:
2016/797/EU, Directive (EU) 2016/797 of the European Parliament and of the Council of 11 May 2016 on the interoperability of the rail system within the European Union (Text with EEA relevance)
...
Abstract
This document is applicable to fastening systems in Categories A - E as specified in EN 13481-1:2012, 3.1 for use on concrete sleepers in ballasted track with maximum axle loads and minimum curve radii as shown in Table 1.
[Table 1 - Fastening category criteria]
NOTE The maximum axle load for Categories A and B does not apply to maintenance vehicles.
The requirements apply to:
- fastening systems which act on the foot and/or web of the rail including direct fastening systems and indirect fastening systems;
- fastening systems for rail sections included in EN 13674-1 (excluding 49E4) or EN 13674-4.
This document is not applicable to fastening systems for other rail sections, rigid fastening systems or special fastening systems used at bolted joints or glued joints.
This document is for the type approval of complete fastening systems.
Lifecycle
...
Original document and degree of correspondence
- EN 13481-2:2022, identical