prBAS EN 16820:2027
Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry - Bonded elastomeric hoses with or without a lining
General information
Status:Project
Number of pages:23
Adoption method:Proglašavanje
Language:engleski
Edition:2.
Realization date:28.10.2026
Forseen date for next stage code:05.11.2026
Technical committee:BAS/TC 50, Packaging, plastics and rubber
ICS:
23.040.70, Hoses and hose assemblies
Abstract
This document is applicable to type D and type SD hose assemblies with hoses made of elastomers and bonded plastics for the transport of gaseous, vaporous, liquid or powdery substances in the pharmaceutical and the biotechnological industries. It specifies the classification, manufacturing and testing of as well as the materials, requirements and quality surveillance for hose assemblies.
These hose assemblies are intended to be used with the relevant substances at temperatures in the range from −30 °C to +100 °C, depending on the medium, and at operating pressures from −0,9 bar (vacuum) to 10 bar (see Table 2 and Table 3). For hoses with a lining made of PTFE and derivatives, temperatures from −30 °C to +140 °C are permissible.
Hose assemblies in accordance with this document are classified into four types, A – D, A – SD. B – D, B – SD.
Lifecycle
...
Original document and degree of correspondence
EN 16820:2026, identical
Relation to BAS standards
Work material
Only members of the technical committee have access to work material. If you are a members of this technical committee you need to login to view the documents. Login