prBAS EN 1915-2:2027

This document specifies the conditions to be taken into consideration when calculating the strength and the stability of GSE. It also specifies general test methods. This part of EN 1915 is intended to be used in conjunction with EN 1915-1:2023, EN ISO 31915-3:2026 (for self-propelled GSE) and EN 1915-4:2004+A1:2009, and with the relevant part of EN 12312 to give the requirements for the types of GSE within the scope of EN 12312. When EN 12312 does not contain a relevant part for a GSE, EN 1915 (all parts) gives general requirements that may apply, although additional machine specific requirements, to be determined by the manufacturer, are likely to be required. NOTE The methods given in this document demonstrate one way of achieving an acceptable safety level. Methods that produce comparable results can be used. This document does not establish additional requirements for the following: a) operation elsewhere than in an airport environment; b) operation in severe conditions, e.g. ambient temperature below −20 °C or over 50 °C, tropical or saturated salty atmospheric environment; c) hazards caused by wind velocity in excess of the figures given in this document; d) earthquake, flood, landslide, lightning and more generally any natural catastrophe. This document is not applicable to GSE which are manufactured before the date of publication by CEN of this document.