prBAS ISO 13726:2027
Hydraulic fluid power — Single rod cylinders, 16 MPa (160 bar) compact series with bores from 250 mm to 500 mm — Accessory mounting dimensions
General information
Status:Project
Number of pages:12
Adoption method:Korice
Language:engleski
Edition:2.
Realization date:29.09.2026
Forseen date for next stage code:14.10.2026
Technical committee:BAS/TC 53, Fluids and fluids systems
ICS:
23.100.20, Cylinders
Abstract
This document specifies the mounting dimensions of the accessories regarding interchangeability for 16 MPa (160 bar) compact cylinders conforming to ISO 6020-3. The accessories are applied to mounting with cylinders manufactured in accordance with ISO 6020-3.
This document covers the following accessories of which the identification code is specified in ISO 6099:
AP2 rod clevis, internal thread (see Figure 1 and Table 1);
AP4 rod eye, plain, internal thread (see Figure 2 and Table 2);
AA4 - L pivot pin (locking plate) (see Figure 3 and Table 3);
AL6 locking plate for pivot pin (see Figure 4 and Table 4);
AA4 - S and AA4 - R pivot pin plain (see Figure 5-6 and Table 5 respectively).
The design of these accessories is based on the maximum forces derived from pressures and bore diameters of the cylinders specified in ISO 2944 and ISO 3320.
Lifecycle
...
Original document and degree of correspondence
ISO 13726:2026, identical
Relation to BAS standards
Work material
Only members of the technical committee have access to work material. If you are a members of this technical committee you need to login to view the documents. Login