prBAS ISO 12917-1:2026
Petroleum and liquid petroleum products — Calibration of horizontal cylindrical tanks — Part 1: Manual methods
General information
Status:Project
Number of pages:46
Adoption method:Proglašavanje
Language:engleski
Edition:2.
Realization date:21.09.2026
Forseen date for next stage code:07.10.2026
Technical committee:BAS/TC 11, Petroleum and petroleum products
ICS:
75.180.30, Volumetric equipment and measurements
Abstract
ISO 12917-1:2017 specifies manual methods for the calibration of nominally horizontal cylindrical tanks, installed at fixed locations.
The methods in this document are applicable to insulated and non-insulated tanks, either when they are above-ground or underground. The methods are applicable to pressurized tanks and to both knuckle-dish-end and flat-end cylindrical tanks as well as elliptical and spherical head tanks.
ISO 12917-1:2017 is applicable to tanks inclined from the horizontal, provided a correction is applied for the measured tilt.
Although this document does not impose any limits on the maximum tank diameter and maximum tank tilt to which this document is applicable, the practical limits would be about 4 m in diameter and 10° in tilt.
Lifecycle
...
Original document and degree of correspondence
ISO 12917-1:2017, identical
Relation to BAS standards
Work material
Only members of the technical committee have access to work material. If you are a members of this technical committee you need to login to view the documents. Login