prBAS EN 15416-5:2026
Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 5: Determination of minimum pressing time under referenced conditions
General information
Status:Project
Number of pages:15
Adoption method:Proglašavanje
Language:engleski
Edition:3.
Realization date:22.10.2025
Forseen date for next stage code:24.10.2025
Technical committee:BAS/TC 9, Cement, gypsum, lime and other inorganic bonded materials
ICS:
83.180, Adhesives
Abstract
This document specifies a laboratory method of determining the minimum pressing time for glue line thicknesses close contact, 0,2 mm, 0,3 mm and 0,5 mm, at three temperatures and three wood moisture contents.
This document is intended to determine the minimum pressing time using a specified procedure for obtaining a reliable base for comparison of minimum pressing time between adhesives under referenced conditions.
The method gives a result that cannot be applied to the safe manufacture of timber structures without taking into account the influence in variation of factors such as timber density, wood moisture content, factory temperature and relative air humidity.
Lifecycle
...
Original document and degree of correspondence
EN 15416-5:2025, identical
Relation to BAS standards
Work material
Only members of the technical committee have access to work material. If you are a members of this technical committee you need to login to view the documents. Login