prBAS EN 10205:2026
Cold reduced tinmill products - Blackplate
General information
Status:Project
Number of pages:34
Adoption method:Proglašavanje
Language:engleski
Edition:3.
Realization date:12.09.2025
Forseen date for next stage code:09.10.2025
Technical committee:BAS/TC 4, Steel, steel products, non-ferrous metals and alloys
ICS:
77.140.20, Stainless steels
77.140.50, Flat steel products and semi-products
77.140.50, Flat steel products and semi-products
Abstract
This document specifies requirements for blackplate product in the form of coils intended for direct use and mostly for the production of electrolytically zinc coated plate, or coils electrolytically coated with either tin (tinplate) or chromium/chromium oxide (ECCS or ECCS-RC).
Blackplate can be a single or double reduced product and is specified in nominal thicknesses that are multiples of 0,005 mm from typical 0,10 mm up to 0,60 mm.
This document applies to coils in nominal minimum widths of 600 mm.
In addition to this document, the general technical delivery conditions of EN 10021 apply.
NOTE Standard width coils for specific uses, e.g. tab stock, can be slit into narrow strip for supply in coil form.
Lifecycle
...
Original document and degree of correspondence
EN 10205:2024, identical
Relation to BAS standards
Work material
Only members of the technical committee have access to work material. If you are a members of this technical committee you need to login to view the documents. Login