prBAS EN 17928-3:2025

Gas infrastructure - Injection stations - Part 3: Specific requirements regarding the injection of hydrogen


General information
Status:Project
Number of pages:10
Adoption method:Proglašavanje
Language:engleski
Edition:1.
Realization date:21.10.2024
Forseen date for next stage code:28.10.2024
Technical committee:BAS/TC 31, Gas and gas engineering
ICS:
27.190, Biological sources and alternative sources of energy
75.200, Petroleum products and natural gas handling equipment

Abstract
This document establishes specific functional requirements of stations for the injection of hydrogen into transmission and distribution systems for fuel gases (natural gas, biomethane, SNG, hydrogen, fuel gas mixtures, etc.; see Figure 1) in accordance with European technical rules that ensure the interoperability of systems in addition to the general functional requirements of EN 17928 1:2024. This document complements EN 17928 1:2024 by specifying the technical safety requirements to be observed with respect to the chemical and physical properties of hydrogen. It furthermore complements the requirements on pipelines specified in EN 12007 3 and EN 1594 by describing the specific requirements with respect to hydrogen. Additionally, it explains how to handle hydrogen measurements during the course of injection. Dedicated requirements for the technical equipment of the gas transmission and distribution network for mixing hydrogen as an additive gas into the gas flow after the injection station are not covered by this document. However, requirements for the resulting gas mixture and the related coordination and interfaces between station and network operation are specified in this document. This document represents the recommendations at the time of its preparation. This document does not apply to injection stations operating prior to the publication of this document. This document specifies common basic principles for gas infrastructure. Users of this document are expected to be aware that more detailed national standards and/or codes of practice can exist in the CEN member countries. This document is intended to be applied in association with these national standards and/or codes of practice setting out the above-mentioned basic principles. In the event of terms of additional requirements in national legislation/regulation than in this document, CEN/TR 13737 (all parts) illustrates these terms. CEN/TR 13737 (all parts) gives: — legislation/regulations applicable in a member state; — if appropriate, more restrictive national requirements; — a national contact point for the latest information.

Lifecycle
...

Original document and degree of correspondence
EN 17928-3:2024, identical

Work material

Only members of the technical committee have access to work material. If you are a members of this technical committee you need to login to view the documents. Login