BAS CEN/TS 1992-4-5:2010

Proračun ankerovanja držača koji se koriste u betonu – Dio 4-5: Naknadno instalirani učvršćivači – Hemijski sistemi


Opće informacije
Status: Povučen
Broj strana: 24
Jezik: Engleski
Izdanje: 1.
Metoda usvajanja: Proglašavanje
Nadnevak objave: 12.07.2010
...

Apstrakt
1.1 General 1.1.6 This document relies on characteristic resistances and distances which are stated in a European Technical Specification. In general the design concept is valid in the product dimensions 6 inferior, or equal, to hef/dnom inferior, or equal, to 20. The actual range for a particular fastener may be taken from the relevant European Technical Specification. In minimum the following characteristics should be given in the relevant European Technical Specification as base for the design method of this CEN/TS. - NRk,s, VRk,s - (...) - (...) - ccr,N, scr,N - ccr,sp, scr,sp - cmin, smin - hmin - limitations on concrete strength classes of base material - kcr, kucr, kT, k2, k3, k4, k8 - dnom, hef, lf , limitations on hef/dnom - yMi, recommended partial factors see CEN/TS 1992-4-1:2009, clause 4

Životni ciklus
...

Izvorni dokument i stepen usklađenosti
  • CEN/TS 1992-4-5:2009, identičan

Veza sa BAS standardima