prBAS EN IEC 62841-3-11:2027

IEC 62841-3-11:2024 applies to transportable combined mitre and bench saws intended to be used with a toothed saw blade for cutting wood and analogous materials, plastics and nonferrous metals except magnesium with a saw blade diameter not exceeding 315 mm, which hereinafter is simply referred to as saw or tool. This document does not apply to: - saws intended to cut other metals, such as magnesium, steel and iron, or food; - saws with an automatic feeding device; - saws designed for use with abrasive wheels; - saws designed for use with dado blades; - single function bench or table saws; - single function mitre saws; - combined mitre and bench saws other than transportable. NOTE 101 Transportable saws intended to cut ferrous metals will be covered by a future part of IEC 62841-3. NOTE 102 Transportable tools designed for use with abrasive wheels are covered by IEC 62841-3-10:2015. NOTE 103 Transportable table saws are covered by IEC 62841-3-1:2014. NOTE 104 Transportable mitre saws are covered by IEC 62841-3-9:2020. NOTE 105 In Europe (EN IEC 62841-3-11), the following additional NOTE applies: NOTE Z101 Combined mitre and bench saws other than transportable are covered by EN 1870-3:2014. This document is to be used in conjunction with <a href="https://webstore.iec.ch/publication/7448">IEC 62841-1:2014</a>. This document supplements or modifies the corresponding clauses in IEC 62841-1, so as to convert it into the IEC Standard: Particular requirements for transportable combined mitre and bench saws.