nsBAS EN ISO 18134-3:2024
Solid biofuels - Determination of moisture content - Part 3: Moisture in general analysis sample
Opće informacije
Status:Projekt
Broj stranica:9
Metoda usvajanja:Proglašavanje
Jezik:engleski
Izdanje:2.
Nadnevak realizacije:27.03.2024
Predviđeni nadnevak naredne faze:26.05.2024
Tehnički komitet:BAS/TC 27, Rudarstvo
ICS:
27.190, Biološki i alternativni izvori energije
75.160.40, Biogoriva
75.160.40, Biogoriva
Apstrakt
This document describes the method of determining the moisture content in the general analysis sample by drying in an oven. The method described in this document is applicable to all solid biofuels. The moisture content of solid biofuels (as received) is always reported based on the total mass of the test sample (wet basis).
Since biofuels in small particle size are very hygroscopic, their moisture content will change with humidity in the atmosphere and, therefore, the moisture of the general analysis sample is determined simultaneously with the determination of other properties being measured (e.g. calorific value, volatile matter, metals, etc.).
NOTE Biomass materials can contain small amounts of volatile organic compounds (VOC) which can evaporate when determining moisture content by oven drying (see References [1] and [2]). The release of such compounds is quite small relative to the overall moisture content as determined by this method and is disregarded in this document.
Životni ciklus
...
Izvorni dokument i stepen usklađenosti
EN ISO 18134-3:2023, identičan
ISO 18134-3:2023, identičan
Veza sa BAS standardima
Radni materijal
Samo članovi tehničkog komiteta imaju pristup radnom materijalu. Ukoliko ste član, molimo prijavite se sa vašim nalogom i dobićete pristup dokumentima. Пријавите се