prBAS EN 1999-1-1:2024
Eurokod 9: Projektiranje aluminijskih konstrukcija – Dio 1-1: Opća pravila
Opšte informacije
Status:Projekt
Broj stranica:371
Metoda usvajanja:Proglašavanje
Jezik:engleski
Izdanje:3.
Datum realizacije:27.10.2023
Predviđeni datum naredne faze:13.03.2024
Tehnički komitet:BAS/TC 58, Projektovanje građevinskih konstrukcija – Eurokod EN 1990, eurokodovi 1, 7, 8 i 9
Direktive:
305/2011, Uredba (EU) 305/2011 o utvrđivanju usklađenih uslova za stavljanje na tržište građevinskih proizvoda
ICS:
91.010.30, Tehnički aspekti
91.080.17, Aluminijske konstrukcije
91.080.17, Aluminijske konstrukcije
Apstrakt
1.1 Scope of FprEN 1999-1-1
(1) FprEN 1999-1-1 gives basic design rules for structures made of wrought aluminium alloys and limited guidance for cast alloys (see Clause 5 and Annex C).
This document does not cover the following, unless otherwise explicitly stated in this document:
- components with material thickness less than 0,6 mm;
- welded components with material thickness less than 1,5 mm;
- connections with:
- steel bolts and pins with diameter less than 5 mm;
- aluminium bolts and pins with diameter less than 8 mm;
- rivets and thread forming screws with diameter less than 3,9 mm.
1.2 Assumptions
(1) In addition to the general assumptions of EN 1990 the following assumptions apply:
- execution complies with EN 1090-3 and EN 1090-5;
- the mechanical properties comply with the product standards listed in 5.2.2.
(2) EN 1999 is intended to be used in conjunction with:
- European Standards for construction products relevant for aluminium structures;
- EN 1090-1, Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components;
- EN 1090-3, Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures;
- EN 1090-5, Execution of steel structures and aluminium structures - Part 5: Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications.
Životni ciklus
...
Izvorni dokument i stepen usklađenosti
EN 1999-1-1:2023, identičan
Radni materijal
Samo članovi tehničkog komiteta imaju pristup radnom materijalu. Ukoliko ste član, molimo prijavite se sa vašim nalogom i dobićete pristup dokumentima. Prijavite se