BAS standards at public enquiry
Institute for Standardization of Bosnia and Herzegovina, on the proposal of BAS technical committees, announces a public enquiry on draft national standards (stage code 40.20).
Deadline for submission of comments on draft national standards is 60 days from the publication of the enquiry on the Institute's website (if necessary, it can be shortened to no less than 30 days).
The drafts of BAS standards are available to our stakeholders via online module for reading the draft of BAS standards, and basic information about the draft (title, scope, technical committee that prepared the draft for public discussion, etc.) is available on the ISBIH website.
The request for access to the draft BAS standard at the public enquiry should be sent to email: stand@isbih.gov.ba. To be able to access the online module for reading the draft BAS standards, you must be registered on our website.
Written comments on the draft national standards (with the designation of BAS technical committee and the reference designation of the BAS draft standards) shall be submitted to the Institute.
To fill this form correctly, see the Comment Form Use Guide.
Standard reference | Stage code | BAS/TC | Real date | Forseen date for next stage code |
---|---|---|---|---|
nsBAS IEC 61786-2:2025 Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings - Part 2: Basic standard for measurements | 40.20 | BAS/TC 15 | 02.04.2025 | 29.05.2025 |
nsBAS IEC TR 60099-10:2025 Surge arresters - Part 10: Rationale for tests specified by IEC 60099-4:2014 | 40.20 | BAS/TC 8 | 12.03.2025 | 12.05.2025 |
nsBAS IEC TR 60216-7-2:2025 Electrical insulating materials - Thermal endurance properties - Part 7-2: Accelerated determination of relative thermal endurance using analytical test methods (RTEA) - Results of the round robin tests to validate procedures of IEC TS 60216-7-1 by non-isothermal kinetic analysis of thermogravimetric data | 40.20 | BAS/TC 8 | 12.03.2025 | 12.05.2025 |
nsBAS IEC TR 61328:2025 Live working - Guidelines for the installation of transmission and distribution line conductors and earth wires - Stringing equipment and accessory items | 40.20 | BAS/TC 8 | 12.03.2025 | 12.05.2025 |
nsBAS IEC TR 61643-03:2025 Low-voltage surge protective devices - Part 03: SPD Testing Guide | 40.20 | BAS/TC 8 | 12.03.2025 | 12.05.2025 |
nsBAS IEC TS 61934:2025 Electrical insulating materials and systems - Electrical measurement of partial discharges (PD) under short rise time and repetitive voltage impulses | 40.20 | BAS/TC 8 | 12.03.2025 | 12.05.2025 |
nsBAS IEC/IEEE 63253-5713-8:2025 Station Service Voltage Transformers (SSVT) | 40.20 | BAS/TC 8 | 12.03.2025 | 12.05.2025 |
nsBAS ISO 1018:2025 Coal - Determination of moisture-holding capacity | 40.20 | BAS/TC 27 | 14.04.2025 | 13.06.2025 |
nsBAS ISO 10828:2025 Worm gears — Worm profiles and gear mesh geometry | 40.20 | BAS/TC 16 | 10.04.2025 | 09.06.2025 |
nsBAS ISO 10975:2025 Agricultural machinery and tractors - Auto-guidance systems for operator-controlled tractors and self-propelled machines - Safety requirements | 40.20 | BAS/TC 45 | 15.04.2025 | 14.06.2025 |
nsBAS ISO 11359-1:2025 Plastics — Thermomechanical analysis (TMA) — Part 1: General principles | 40.20 | BAS/TC 50 | 25.02.2025 | 24.04.2025 |
nsBAS ISO 11359-2:2025 Plastics — Thermomechanical analysis (TMA) — Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature | 40.20 | BAS/TC 50 | 25.02.2025 | 24.04.2025 |
nsBAS ISO 11359-3:2025 Plastics — Thermomechanical analysis (TMA) — Part 3: Determination of penetration temperature | 40.20 | BAS/TC 50 | 25.02.2025 | 24.04.2025 |
nsBAS ISO 1171:2025 Coal and coke - Determination of ash | 40.20 | BAS/TC 27 | 14.04.2025 | 13.06.2025 |
nsBAS ISO 11999-4:2025 PPE for firefighters — Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures — Part 4: Gloves | 40.20 | BAS/TC 14 | 15.04.2025 | 15.06.2025 |
nsBAS ISO 11999-5:2025 PPE for firefighters — Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures — Part 5: Helmets | 40.20 | BAS/TC 14 | 15.04.2025 | 15.06.2025 |
nsBAS ISO 11999-6:2025 PPE for firefighters — Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures — Part 6: Footwear | 40.20 | BAS/TC 14 | 15.04.2025 | 15.06.2025 |
nsBAS ISO 1206:2025 Rolling bearings — Needle roller bearings with machined rings — Boundary dimensions, geometrical product specifications (GPS) and tolerance values | 40.20 | BAS/TC 16 | 10.04.2025 | 09.06.2025 |
nsBAS ISO 1213-2:2025 Coal and coke - Vocabulary - Part 2: Terms relating to sampling, testing and analysis | 40.20 | BAS/TC 27 | 14.04.2025 | 13.06.2025 |
nsBAS ISO 13315-1:2025 Environmental management for concrete and concrete structures — Part 1: General principles | 40.20 | BAS/TC 21 | 14.04.2025 | 13.06.2025 |